Broken Nose by Kryolan

Before
Cleanse the skin with Clean & Care Natural Micellar Water remove impurities and oils.

Step 1
Using a cotton swab, apply Pros Aide 60g in a thin layer to the bridge of the nose. This layer must become transparent before proceeding to the next step.

Step 2
Using a Make-up Mixing Spatula, transfer three pea-sized amounts of Cinewax Neutral 40g from the container. Roll the amount between your fingers and palms to add warmth to the wax. From a combination of fingers and a spatula, smooth the wax onto the bridge of the nose so that the edges blend seamlessly into the skin. Create a 3D cut in the center of the wax over the bridge of the nose.

Step 3
Using the corner of a Make-up Sponge Angled, apply a layer of Pros Aide 60g over the applied Cinewax Neutral 40g and around the edges.

Step 4
Set the design with Translucent Powder 50g and a soft powder brush.

Step 5
Use Skin Illustrator On Set FX Palette to replicate a realistic look. 

Step 6
A small amount of Fleet Street Bloodworks Drying Blood is placed in the hollow of the incision. Then use the hooked end of a sculpting tool to give the wax a skin-like surface.