The Ed Head and Alanna H2.0 are the world's first water fillable sculpting busts, make mould making so much easier! 

After sculpting your character over the armature, Radiant Assisted Demold (RAD) Technology provides you with an in-built clay release system to ease and quicken the demoulding process for artists working with wax-based clay mediums. Simply turn the form over, with the bottom-side up, unscrew the cap and fill the armature with hot water. The heat will begin to transfer to the surrounding clay and cause a softening effect within the mould.

With both busts being reusable, they have been specially designed to withstand continued use with little to no wear due to its high-density plastic. 

Top Tip! Need to weigh down your armature but still want to utilize the RAD functionality? Fill it full of sand!

The Ed Head measures 18" H x 13" W x 11" D with a circumference at the brow of 23" approximately. 

The Alanna Head measures 17” H x 12” W x 9.5” D with a circumference at the brow of 22” approximately.

Each headform is supplied with a black plastic cap to seal the bottom spout.

Melting Point: 110° C (230° F)