Polyurethane Foams
Procell RF2 ® Part A reacts with Procell RF2 Part B to form a low density rigid polyurethane foam. The system is designed to have a slow rise, with a cream time of 30-40 seconds, allowing plenty of time for mixing of casts up to 5 kgs in weight.
Key benefits of Procell RF2 include:-
Low density (typically 30-40 kg/m3, 2-3 lb/ft3)Excellent gap-filling material
CFC-free and non-flammable
Easy to mix – 1:1 by weight or by volume
Low viscosity allows for easy pouring once mixed
Can be cut and shaped with appropriate tools
Can be used with an additive to give a degree of fire retardance.
Procell RF2 has been formulated for use primarily for moulding and casting applications. The processing characteristics allow for mixing by hand, drill or machine, although best results are obtained with a machine.
The rigid, low density nature of the material allows it to be used in a range of applications:-
- Arts and Crafts work
- Film, TV and Stage props and Special effects
- Mould Backing
- Scenery Design
- Sound Deadening
Typical Properties – Liquid Materials
|
Property |
Units |
Procell RF2 Part A |
Procell RF2 Part B |
|
Viscosity @25°c |
cps |
~1200-1500 |
100-150 |
|
Specific Gravity @25°c |
°Shore A |
1.08 |
1.22 |
|
Appearance |
- |
Slightly Viscous Hazy Liquid |
Dark Brown Liquid |
Typical Properties – Cured foam
|
Property |
Units |
Minimum |
Maximum |
|
Free-Rise Density |
Kg/m3 |
30 |
40 |
|
Colour |
- |
Pale Yellow |
|
Pro-cell S5 is a Mouldlife registered Trade Marked Product.
View Datasheet-
Weight:2kg
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product